Editing A Tone; Editing The Multi-Effects - Roland VERSELAB MV-1 Owner's Manual

Changing the Tones

Editing a Tone

Here's how to adjust the volume or reverb send level, set the sample
playback range and make other settings related to tones and samples.
1 .
Press the [SEQ] button to set the workflow to "Sequencer."
2 .
Press the [SECTION SELECT] button to switch the pads to
Section Select mode.
3 .
Press a button from [KICK] through [INST 2] to select a track.
4 .
Press the [EDIT] button, and then press pads [1]–[16] to select
the clip to edit.
The CLIP EDIT MENU screen appears.
5 .
Use the [VALUE] dial to select the menu, and then press the
[VALUE] dial.
TONE SETTING
SAMPLE EDIT
Track type: Tone
* Only displays when loading a sample.
KIT SETTING
Track type: Drum Kit
INST EDIT PAD 1–16
6 .
Use the [VALUE] dial to select a parameter, and edit the value.
&For details, refer to the "Parameter Guide" (PDF).
24

Editing the Multi-Effects

You can use multi-effects on tones and samples to process the sound.
1 .
Press the [SEQ] button to set the workflow to "Sequencer."
2 .
Press the [SECTION SELECT] button to switch the pads to
Section Select mode.
3 .
Press a button from [KICK] through [INST 2] to select a track.
4 .
Press the [EDIT] button, and then press pads [1]–[16] to select
the clip to edit.
The CLIP EDIT MENU screen appears.
5 .
Use the [VALUE] dial to select "MULTI FX," and then press the
[VALUE] dial.
MULTI FX screen appears.
6 .
Use the [VALUE] dial to select a parameter, and edit the value.
&For details, refer to the "Parameter Guide" (PDF).