Creating Phrases; Step Recording; (Tr-Rec); Recording In Real Time - Roland VERSELAB MV-1 Owner's Manual

Creating Phrases

This shows you how to create phrases (performance data). There are two ways to create a phrase: inputting note by note (note data) using "step
recording, " or recording what you play in real time using "real-time recording. "

Step Recording

(TR-REC)

This lets you input the notes (note data) using the pads. You can also
input notes while playing back a clip.
Track type: Tone
Create your instrument performance by specifying the steps that make
sound for each track.
1 .
Follow the steps in "Selecting a Clip" (p. 19) to select the
clip for the phrase you want to create.
The screen example shows that a phrase is created for the clip in
the KICK track of section 1.
2 .
Press the [NOTE] button to switch the pads to Note mode.
3 .
Press pads [1]–[16] to select the scale you want to input.
* If you hold down the [SHIFT] button and press the MEASURE [<] [>] buttons,
the tonal range of the pads change in octaves.
4 .
Press the STEP SEQUENCER [1]–[16] buttons to specify the
steps that play sound.
This inputs the notes.
5 .
Repeat steps 3–4.
Track type: Drum Kit
Create a rhythm pattern by specifying the steps that play sound for
each drum instrument.
1 .
Follow the steps in "Selecting a Clip" (p. 19) to select the
clip for the phrase you want to create.
2 .
Press the [NOTE] button to switch the pads to Note mode.
3 .
Press pads [1]–[16] to select the drum instrument you want
to input.
4 .
Press the STEP SEQUENCER [1]–[16] buttons to specify the
steps on which the drum instrument plays.
This inputs the notes.
5 .
Repeat steps 3–4.
MEMO
5 Use the measure indicator (lights up) to check the measure position you
are editing. You can use the MEASURE [<] [>] buttons to move between
measures.
5 Press the MEASURE [>] button while holding down the [COPY] button to
make the measure twice as long (Duplicate Meas).
5 Press the MEASURE [<] button while holding down the [COPY] button to
make the measure half as long (Halve Meas).
26

Recording in Real Time

This lets you create instrument performances and rhythm patterns by
recording what you play on the pads in real time.
MEMO
5 You can record your operations of the [CTRL 1]–[CTRL 3] knobs as motions
(p. 29).
5 When you enable the quantize feature, the timing of what you play is
corrected as you record (p. 28).
1 .
Follow the steps in "Selecting a Clip" (p. 19) to select the
clip for the phrase you want to create.
2 .
Switch the pads to the operation mode of your choice (p. 25).
* With real-time recording, you can record your performance data in Note
mode, Velocity mode, Style mode and Chord mode.
3 .
Press the [REC] button to enter record standby.
4 .
Press the [ A ] (START/STOP) button to begin recording.
* When count-in is turned on, a one-measure count-in plays before recording
begins.
&"Setting the Tempo and Metronome" (p. 27)
5 .
Play using pads [1]–[16].
This inputs the notes.
6 .
Press the [ A ] (START/STOP) button to stop recording.
7 .
Press the [REC] button to make it go dark.