Creating A Song By Arranging The Sections; Creating A Song; Making Song-Related Settings - Roland VERSELAB MV-1 Owner's Manual

Creating a Song by Arranging the Sections

This shows you how to create a
vocals, to make a full song with vocals (p. 37).

Creating a Song

Here's how to arrange the sections to match the structure of your
song.
1 .
Press the [SONG] button to set the workflow to "SONG."
2 .
Press the [SECTION SELECT] button to switch the pads to
Section Select mode.
* Check whether a track aside from the VOCAL track is selected.
* Press a pad to preview the corresponding section.
3 .
Press the [REC] button to make it light.
The SONG REC screen appears.
4 .
Press the STEP SEQUENCER [1]–[16] buttons to specify where
to place (position) the section.
The button you press blinks.
* The sections are arranged in order, beginning with the position selected
with the STEP SEQUENCER [1] button (POS 1). Sections must be arranged
continuously without leaving blank space.
* You can rearrange sections by specifying a position that already contains a
section.
5 .
Press pads [1]–[16] to select the sections.
This arranges the section in place.
5
Deleting an Arranged Section
While holding the [CLEAR] button, press the STEP SEQUENCER [1]–[16]
buttons to select the position that you want to delete.
5
Inserting Sections Between Other Sections
Press the STEP SEQUENCER [1]–[16] buttons to specify where to insert the
section. Hold down the [SHIFT] button and press pads [1]–[16].
6 .
Repeat steps 4–5.
You can arrange up to 99 consecutive sections (POS 1–99).
* Press the MEASURE [<] [>] buttons to move the position.
7 .
Once you finish the song, press the [REC] button to make the
button go dark.
Press the [ A ] (START/STOP) button to play back the song you
created.
"song" by arranging sections. With this feature, you can use the songs you create as backing tracks for recording
Selected position

Making Song-Related Settings

This shows how to make song settings such as volume, SONG
template function settings and so on.
1 .
Press the [EDIT] button, and then the [SONG] button.
The SONG screen appears.
2 .
Use the [VALUE] dial to select a parameter, and edit the value.
&For details, refer to the "Parameter Guide" (PDF).
Category Explanation
Sets the song's volume, key and scale.
About the key and scale settings:
If you set the key and scale of a song and then load (p. 21) or
GEN
import (p. 21) a clip, the key and scale of the clip is automatically
changed to match the song.
* The TRANSPOS parameter also needs to be set.
Sets the section to assign for the structural elements of a song (like
TEMPLATE
the intro or the chorus) when using a song template.
Sets whether the clip's key/scale are automatically changed to follow
the key/scale that are set for the song. Set this to "ON" to make the
TRANSPOS
clip's key/scale follow the song's settings.
* This is only enabled when the track type is "tone. "
35