Controllers For Preset Parameters Editing And Saving - Roland SH101-M Owner's Manual

SH101-M
CC#1 Modulation
CC#7 Volume maximum (value 127)
CC#11 Expression
CC#42 Own controller VCF– Frequency
CC#64 Hold off (value 0)
Pitch Bend (Wheel)
Note that the value of this CC must be always 0.
CC #122 – Local On / Off
For the values from 0 to 63 (i.e. "Local Off"), SH-101 keyboard is disconnected and the
instrument's keyboard is controlled by Note On/Off MIDI commands. (The interface is in the
"Keyboard" working mode.
Values from 64 to 127 (i.e. "Local On") returns control back to SH-101 keyboard. (The interface
is in the "Normal" working mode.
CC #123 – All Notes Off (ANO)
The instrument is muted (GATE signal is switched off immediately after reception of this
controller – independently on MIDI Note-On commands received previously. Note that the value of this
CC must be always 0.

5.1.2.2. CONTROLLERS FOR PRESET PARAMETERS EDITING AND SAVING

CC #40 – VCO - Key Shift
Controls VCO – Key Shift parameter (see chapter 4.2.1). Note that acceptable range of the
CC#40 is 0 to 67 only (corresponds to the VCO – Key Shift parameter). All other received values (68 to
127) are converted to the closest valid value (i.e. 67).
CC #41 – VCO - Aftertouch Bend
Controls VCO – Aftertouch Bend parameter (see chapter 4.2.2).
CC #42 – VCF – Frequency
Controls VCF – Frequency parameter (see chapter 4.2.3).
CC #43 – VCF – Key Follow
Controls VCF – Key Follow parameter (see chapter 4.2.4).
CC #44 – VCF - Velocity Amount
Controls VCF – Velocity Amount parameter (see chapter 4.2.5).
CC #45 – VCF - Aftertouch Amount
Controls VCF – Aftertouch Amount parameter (see chapter 4.2.6).
CC #46 – VCA – Key Follow
Controls VCA – Key Follow parameter (see chapter 4.2.7).
CC #47 – VCA - Velocity Amount
Controls VCA – Aftertouch Amount parameter (see chapter 4.2.8).
CC #48 – VCA - Aftertouch Amount
Controls VCA – Aftertouch Amount parameter (see chapter 4.2.9).
CC #49 – CTRL - Volume Mode
Controls CTRL – Volume Mode parameter (see chapter 4.2.10). Note that CC#49 values from 0
to 31 correspond to "Off" mode, 32 to 63 to "Volume" mode, 64 to 95 to "Expression" mode and 96 to
127 to "Volume + Expression" mode of the parameter.
No part of this publication may be reproduced in any form without the written permission of CHD Elektroservis.
off (value 0)
maximum (value 127)
middle position (value 4096)
Copyright © 2017 CHD Elektroservis. All rights reserved.
MIDI Interface for Roland SH-101
maximum (value 127)
17
Model 8-438 ver. 1.0