Main Specifications - Roland VERSELAB MV-1 Owner's Manual

Main Specifications

Sound Generator
Track Type
Maximum Polyphony
Tracks
Sections
Vocal Take
Tones
Effects
Step Sequencer
Looper
Display
External Storage
Connectors
Power Supply
Current Draw
Dimensions
Weights
(excluding AC adaptor)
Accessories
* This document explains the specifications of the product at the time that the document was issued. For the latest information, refer to the Roland website.
48
ZEN-Core (Tone, Drum Kit)
Tone, Drum Kit, Looper (Audio Loop)
ZEN-Core: 128 voices (varies according to the sound generator load)
Looper: 8 (varies according to the available number of Looper track)
Vocal Take: 16 (varies according to the vocal take size)
7 tracks and 1 vocal track
16 sections
16 takes
Preset Tone: 3,000 or greater
Preset Drum Kit: 80 or greater
User Sample (as a Tone or Drum Kit): available by importing from SD card
* Available total time for User Sample and Vocal take: 12 minutes in mono, 6 minutes in stereo (44.1 kHz)
* Available format of User Sample: WAV 32–96 kHz/16-bit, 24-bit (mono, stereo)
Looper Sample (as a clip of Looper track): available by importing from SD card, recording via EXT IN/Tracks
* Available total time for Looper Sample: Approx. 60 sec (44.1 kHz)
* Available format of Looper Sample: WAV 44.1 kHz/16-bit, 24-bit, 32-bit, 32-bit float (mono, stereo)
Track Multi-Effects: 90 types
Track EQ
Chorus/Delay: 9 types
Reverb: 7 types
Master Effects: 90 types
Master Compressor
Master EQ
Maximum Step: 128 steps
* Available on a Tone or Drum Kit Track
Time Stretch, Pitch Shift
* Available on a Looper Track
16 characters, 2 lines LCD (with backlit)
SD card (SDHC supported) for saving Project Data and Audio Data
PHONES jacks: Stereo 1/4-inch phone type, Stereo miniature phone type
LINE OUT (L/MONO, R) jacks: 1/4-inch phone type
LINE IN (L/MONO, R) jacks: 1/4-inch phone type
MIC connector: XLR type (phantom power: +48 V, 10 mA Max.)
MIDI (IN, OUT) connectors
USB port: USB B type (Audio, MIDI)
DC IN jack
AC adaptor
Obtained via USB port (USB bus power)
2,000 mA (AC adaptor)
500 mA (USB bus power)
354 (W) x 208 (D) x 60 (H) mm
13-15/16 (W) x 8-3/16 (D) x 2-3/8 (H) inches
1.2 kg
2 lbs 11 oz
Leaflet "Read Me First"
AC adaptor
SD card (installed in the product when shipped from the factory)
SD card protector