Problem Solver; What To Do When A Message Is Displayed; U "Replacing And Adjusting The Print Head; U "How To Start In User Self Repair Mode - Epson SC-R5000 Series Repair Manual

SC-R5000 Series/SC-R5000L Series

Problem Solver

What to Do When a Message Is Displayed

If the printer displays one of the messages shown below, refer to the solution listed and take the necessary steps.
If messages that are not shown in the following table appear and you are uncertain about how to solve the problem, see
the User's Guide (Online Manual).
Message
The print heads have not been
replaced. Turn off the power and
replace the print heads with new
ones. Then start in User Self Repair
Mode.
A used print head is set. Turn off the
power and replace the print heads
with new ones. Then start in User
Self Repair Mode.
User Self Repair Guide
Problem Solver
What to do
It is possible that the Print Head you replaced may not be new.
Turn off the printer, replace the Print Head with a new one, and then start the printer in
User Self Repair Mode.
"Replacing and Adjusting the Print Head" on page 11
U
"How to Start in User Self Repair Mode" on page 9
U
It is possible that the Print Head you replaced may have been used.
Turn off the printer, replace the Print Head with a new one, and then start the printer in
User Self Repair Mode.
"Replacing and Adjusting the Print Head" on page 11
U
"How to Start in User Self Repair Mode" on page 9
U
23