Epson SC-R5000 Series Repair Manual page 16

SC-R5000 Series/SC-R5000L Series
Important:
c
Do not touch the areas you should not touch while
handling the replacement Print Head.
"Do Not Touch These Areas" on page 12
U
A
Use both hands to take the replacement Print
Head out of the protective case and install it in the
printer.
Install it as shown above so that the label can be
seen towards the front.
Important:
c
❏ Immediately install the Print Head to the
printer after removing it from the case.
There is a risk of lint or dust getting on it.
❏ Placing the nozzle side on a surface can
cause malfunctions.
User Self Repair Guide
Replacing and Adjusting the Print Head
B
C
16
Connect the left and right connectors.
Lightly press on the top of the connectors to
assure they are inserted.
Use your fingers to turn the fixing screws (4 pc)
clockwise to secure the connector.
User your fingers to tighten the screws until they
stop turning.