Drive Error Codes; Drive Error Codes - IBM TS2900 Setup, Operator, And Service Manual

Table B-1. Library error codes (continued)
Code (H) Description
Sensor error #2.
Accessor encoder sensor A
00F1
error detected during blink
check. Suspect the Accessor
encoder sensor A.
Sensor error #3.
X encoder sensor error
00F2
detected during blink check.
Suspect the X encoder sensor.
Sensor error #4.
Magazine sensor error
00F3
detected during blink check.
Suspect the magazine sensor.
Sensor error #5.
X origin sensor error detected
00F8
during blink check. Suspect
the X origin sensor.
Sensor error #6.
Cartridge sensor error
00F9
detected during blink check.
Suspect the cartridge sensor.
Sensor error #7.
Accessor forward sensor
00FA
error detected during blink
check. Suspect the Accessor
forward sensor.
Sensor error #8.
Accessor origin sensor error
00FB
detected during blink check.
Suspect the Accessor origin
sensor.

Drive Error Codes

Table B-2. Drive error codes
Code (H) Description
Invalid data sent to drive.
0200
NAK detected.
Timeout error occurred while
0201 waiting for response from
drive.
0203 Drive disconnected.
0205 Drive busy.
Command could not be
0206 executed because drive is not
mounted.
Drive media eject timeout
0220
detected.
Panel Indication
Cycle the power supply and try again.
• If the problem is corrected, run Library Verify
CHK 00F1
before resuming normal library operations.
• If the problem persists, see "Contacting IBM
Technical Support" on page 7-1.
CHK 00F2
CHK 00F3
CHK 00F8
CHK 00F9
CHK 00FA
CHK 00FB
Panel indication
1. Reseat all cables. See "Reseating Cables" on
CHK 0200
page 6-10.
2. Cycle the power supply and try again.
• If the problem is corrected, run Library Verify
CHK 0201
• If the problem persists, see "Contacting IBM
CHK 0203
CHK 0205
CHK 0206
CHK 0220
Action Required
Action Required
before resuming normal library operations.
Technical Support" on page 7-1.
Appendix B. Error Codes
B-9