Introduction; Specifications - Banner American Easy-Lam II Operating Instructions Manual

Congratulations on your purchase of the Easy-Lam II Roll Laminator. This
unit is designed to provide years of trouble-free service.
The Easy-Lam II will accept rolls of laminating film up to 27" wide in both
1.5 and 3 mil thicknesses. Paper and card stock up to 1/16" (1.6mm) thick
may be laminated without adjusting the feed rollers.
The Easy-Lam II will accept 5 mil film if the machine was purchased with
the 5 mil switch only!
Your Easy-Lam II is preset at the factory for most applications, so any
adjustments should be minor. A thermometer provides continual indication
of the heat shoe temperature, which may be adjusted as needed.
Plastic Width
Plastic Thickness
Maximum Roll Length
Speed
Net Weight
Power Requirements

INTRODUCTION

SPECIFICATIONS

Up to 27" (68.6cm)
1.5 mil and 3 mil (37 and 75 micron).
5 mil (125 micron) with 5 mil option switch
only.
1.5 mil – 1,000 feet (304.8 meters)
3 mil – 500 feet (152.4 meters)
5 mil – 250 feet (76.2 meters)
5 feet per minute (1.64m/minute)
91 lbs (41 kg)
120VAC, 60Hz, 1840 watts (UL),
220VAC available
5