Maintenance; Cleaning The Heat Shoes And Laminator Rollers - Banner American Easy-Lam II Operating Instructions Manual

Roll laminator
Hide thumbs Also See for Easy-Lam II:
Table of Contents

Advertisement

Maintenance

This section contains instructions for cleaning and maintaining your
laminator. These procedures should be performed at regular intervals to
help ensure the trouble-free operation of your laminator.

Cleaning the Heat Shoes and Laminator Rollers

The Heat Shoes and Laminating Rollers should be cleaned of any residual
adhesive whenever the film does not pass smoothly over their surfaces.
NOTE: The surface of the Heat Shoes is Teflon-coated and must only be
cleaned using a soft cloth. The Heat Shoes can easily be damaged by sharp
or abrasive objects.
1. Unplug the unit.
2. Allow the Heat Shoes to cool.
3. Remove the Feed Table.
4. Cut the plastic film at the top and bottom mandrels.
5. Turn the Motor Switch on and pull the film out of the back of the
machine.
6. Turn the Motor Switch off.
7. Use a soft cloth or a teflon scrub pad moistened with alcohol to
remove any residue from the Teflon surface of the Heat Shoes and
Laminating Rollers.
8. Allow the Heat Shoes and Laminating Rollers to dry before re-
threading the film.
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents