Ø Removing Wrap-Arounds; Warranty; Return Policy - Banner American Easy-Lam II Operating Instructions Manual

Removing Wrap-arounds
When laminating with thinner gauges of films, there is the possibility of the
film wrapping around the Pull Rollers. Refer to Cleaning the Heat Shoes
and Laminating Rollers in order to remove a wrap-around. If the film
cannot be pulled out of the back of the machine, leave the motor switch on
and use the reverse switch on the back of the machine to reverse the rollers
so the film can be pulled up and out the front of the machine.
CAUTION! The Heat Shoes are hot! Please use caution when
cleaning the rollers or Heat Shoes or when removing wrap-arounds.

Warranty

Your laminator is warranted to be free of defects in material and
workmanship for a period of one year from the original purchase date. In
the event of a defect in material or workmanship, the manufacturer or its
authorized dealer will repair or replace (at their option) the laminator. This
warranty does not cover rollers that have been damaged due to improper
usage. The manufacturer makes no other warranty stated or implied except
as stated above.

Return Policy

If your laminator is not operating properly, first review the Operating
Instructions and Troubleshooting Guide. If the malfunction cannot be
corrected, contact your local dealer for instructions. Be sure to have your
machine serial number and date of purchase handy. If the laminator must be
returned to the dealer, proper packaging and freight charges are your
responsibility. Shipping damages as a result of improper packaging are not
covered under the terms of this warranty.
18