Connecting Natural Gas And Hose To Grill - Brinkmann Southgate Heavy-Duty Natural Gas Grill Owner's Manual

Heavy-duty natural gas grill
Table of Contents

Advertisement

Available languages

Available languages

FOR OUTDOOR USE ONLY. DO NOT operate indoors or in an enclosed area such as a garage,
shed or breezeway.
Use your grill OUTDOORS in a well ventilated space away from dwellings or other buildings to
prevent dangers associated with gas accumulation and toxic vapors. We recommend your grill
be situated at least 10 feet (3.1 m) from buildings. Not adhering to these clearances will prevent
proper ventilation and may increase the risk of a fire and/or property damage, which could also
result in personal injury.
Maintain a minimum clearance of 36 inches (91 cm) between all sides of grill, deck railings,
walls or other combustible material. DO NOT use grill under overhead unprotected combustible
construction.
DO NOT use or install this grill in or on a recreational vehicle and/or boat.
DO NOT use hard metal piping of any kind to connect this type of grill to a natural gas source.
Use only hose specified by manufacturer. Using hard metal piping or convoluted metal tubing is
an unsafe practice. Movement of the grill can cause breakage of metal pipe.
The appliance and its individual shut off valve must be disconnected from the gas supply
piping system during any pressure testing of that system at test pressures in excess of
1/2 psi (3.5 kPa).
The appliance must be isolated from the gas supply piping system by closing its individual
manual shut off valve during any pressure testing of the gas supply piping system at test
pressure equal to or less than 1/2 psi (3.5 kPa).
This grill is designed for natural gas use at 7 inch water column supply pressure. Verify supply
pressure with your local gas company. Not for use with LP gas.
Connections to gas source must be performed by a certified plumber.
INSTALLATION INFORMATION:
The installation of this appliance must be in accordance with:
All applicable local codes, or in the absence of local codes, either:
National Fuel Gas Code,
ANSI Z223.1 1988 or latest edition (USA)
Natural Gas Installation Code: CAN/CGA B149.1 (Canada)
Propane Installation Code: CAN/CGA B149.2 (Canada)
Only ANSI Z21.54 approved hoses should be used with this grill.
To check your local codes, see your local LP gas dealer or natural gas company.
WARNING
WARNING
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Southgate 810-8445-n

Table of Contents