Connecting Your Grill To The Natural Gas Source - Brinkmann 810-6570-F Instructions For Use & Care

CONNECTING YOUR GRILL TO THE NATURAL GAS SOURCE

1. Coat pipe nipple with gas resistant tefl on tape or pipe dope. Tighten quick-disconnect coupling onto
pipe nipple that leads to natural gas supply (Figure A).
2. After grill is completely assembled, make sure natural gas supply valve is "OFF" and then connect
natural gas hose to socket. Push sleeve back on socket (Figure B) and insert plug until sleeve snaps
forward, locking plug into socket. Be sure to leak test these connections prior to use.
(Figure A)
Natural gas supply
Supply valve
When attaching the quick disconnect to your natural gas supply line, use a pipe fi tting,
(Figure B)
Natural gas supply
DISCONNECTING YOUR GRILL FROM THE NATURAL GAS SOURCE
1. Turn natural gas supply valve "OFF"
2. To disconnect, push sleeve back and pull plug out of sleeve.
9
Quick-disconnect
coupling
Pipe nipple
Pipe Fitting
DO NOT use a fl are fi tting.
Socket
Supply valve
Insert cover when hose is disconnected
Plug
Sleeve
Push sleeve back to attach
Hose
Flare Fitting
Hose