Speakers - HP EliteBook 845 G8 Maintenance And Service Manual

2. Use a tool (2) to release the battery from the computer (3).
Reverse this procedure to install the RTC battery.

Speakers

To remove the speakers, use this procedure and illustration.
Table 6-3 Speaker description and part number
Description
Speaker Kit
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the speakers:
1. Disconnect the speaker cable from the system board (1).
2. Remove the cable between the speakers from the clips along the bottom of the battery (2).
Preparation for disassembly on page
Bottom cover on page 32).
32).
Battery on page 42).
Component replacement procedures
Spare part number
M73520-001
45