Heat Sink - HP EliteBook 845 G8 Maintenance And Service Manual

Table 6-10 Fan description and part number
Description
Fan assembly
Before removing the fan, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the fan assembly:
1. Remove the cables from the clips on the side of the fan (1).
2. Disconnect the fan cable from the system board (2).
3. Loosen the three Phillips captive screws (3) that secure the fan to the computer, and then remove the
fan from the computer (4).
Reverse this procedure to install the fan assembly.

Heat sink

To remove the heat sink, use these procedures and illustrations.
Table 6-11 Heat sink descriptions and part numbers
Description
Heat sink
Before removing the heat sink, follow these steps:
Preparation for disassembly on page
Bottom cover on page 32).
32).
Battery on page 42).
Spare part number
M27459-001
Component replacement procedures
Spare part number
M44335-001
53