HP EliteBook 845 G8 Maintenance And Service Manual page 69

3. Disconnect the battery cable from the system board (see
4. Remove the power connector cable (see
Remove the display assembly:
1. Disconnect the display cable (1) and remove it from the clip (2).
2. Disconnect the antenna cables from the WWAN module (3), and then remove the cables from the clip
(4).
3. Disconnect the antenna cables from the WLAN module (5) and disconnect the left display cable (6), and
then remove the cables from the clips along the side of the fan (7).
4. Remove the six Phillips M2.5 × 4.0 screws (1) that secure the display assembly to the computer.
5. Rotate the display to open the hinges (2).
Battery on page
Power connector cable on page
Component replacement procedures
42).
47).
59