Outer Enclosure with Cover Removed
The Outer Enclosure base (refer to
Telco incoming cabling and cabling to the customer premises. Each cable entry has grommets
to provide environmental protection. The cable entries also support strain relief with Tie-
wraps.
NOTE
In the figure above, the cover for the SBU ONT has been removed for clarity
purposes.
61287723G1-5B
Surface Mounting
Hole
Figure 1. Enclosure and Electronics Module
Figure
1) contains cable entry points for power, ground,
Telco Access Screw
Surface
Mounting
Hole
Components and Interfaces
TOTAL ACCESS 372
1287722G1
TELEPHONE TROUBLESHOOTING:
1. Identify the bad line (POTS 1-8).
2. Plug any working phone into
the appropriate jack.
If the telephone works, the unit
is functioning normally.
If the telephone does not work,
contact your service provider.
3. Remove the telephone from the
POTS jack.
7