IVT EFHG-2000 Instruction Manual page 6

Instruction manual
TOOL SPECIFICATIONS
EN
Rated power I / II [W]
Voltage ~ Frequency [V ~ Hz]
Heating time [sec]
Air flow temperature I / II [°C]
Air flow I / II [L/min]
Weight [Kg]
Safety class
PART LIST
1. Steel tube
2. Nozzle
3. On / Off switch
4. Handle
5. Support
CONTENT OF THE BOX
Instruction manual (1 pc), nozzle (1 pc).
INTENDED USE
This tool is designed for removing paint and varnish,
stickers, loosening rusty and too tight nuts and metal
screws, thawing frozen pipes, door locks, padlocks,
etc., highlighting natural grains in wood surfaces
before varnishing or painting, descaling wood paneling,
quick drying paint and varnishing, drying test coats,
removing old putty from window panes, drying wet and
damp objects and grounds before reworking, shrinking
packaging foil, shrinking polyvinyl wire connections,
stripping floor coverings, shaping plastics and igniting
fires and barbecue embers in a fast and effective way
and without chemical fuels or lighting fluid.
SAFETY REGULATION FOR THE USE
General safety rules
The following listed safety instructions should serve you
for the right use of the tool and for the protection of your
own safety, therefore, please read this very carefully.
When passing this tool to a third person, these
instructions must be handed too.
Retain this user's manual and all other literature supplied
with your tool for any future reference.
Comply with all the safety information and the warnings
on the tool.
Be familiar with the controls and the proper use of the
tool before attempting to use it and above all, make sure
Model EFHG-2000
1000 / 2000
230 ~ 50
500 / 700
300 / 500
you know how to stop to use it in case of emergency.
Following these simple instructions will also maintain
your tool in good working order.
∙
The tool must be assembled correctly before use.
∙
Only use the tool for its designed purposes.
∙ On the tool, there may be also decals and further
indications about the safety equipment to use that
must be considered. The prevention of accidents is
dependent upon the awareness, common sense and
proper training of everyone involved in the operation,
transport, maintenance and storage of the tool.
∙
Never leave the tool unattended.
∙ Never allow children to use the tool. Children
should be supervised to ensure that they do not play
with the tool.
∙ Keep children and pets away. All onlookers should
be kept at a safe distance away from the tool when it
is in use.
∙ The user is responsible for third parties while
working with the tool.
∙ People who aren't acquainted with the operating
instructions, children, juveniles who have not yet
reached the minimum age for using this tool and people
under the influence of alcohol, drugs or medication
are not allowed to use the tool. Local regulations may
restrict the age of the operator.
WARNING!
alcohol, medication and drugs, plus
states of illness, fever and fatigue will
affect your ability to react. Do not use
this tool in any of these situations.
∙
Make sure that all the protective devices (if present)
are fitted and are in good condition.
∙
Never operate the tool with defective safety devices
or guards (if present), or without safety devices in
place.
∙
Inspect the entire tool to look for loose parts (e.g.
nuts, bolts, screws, etc.) and for any damage. Check
at frequent intervals if screws and bolts (if present)
6
30
1
II
The consumption of