Axis Camera Station User Manual page 62

AXIS Camera Station Client
Important!
Get configuration
Upload configuration
Camera popup filter...
View Menu
Monitor Menu
62
To Get and Upload configuration settings from the server, clients must first be
granted rights to use the Administration pages from AXIS Camera Station
Client: from AXIS Camera Station's Administration pages, under the General
tab, click Allow clients to update configuration | Yes. Click OK to save and
exit.
Every time you start AXIS Camera Station Client, new updates are sent to it
from the server, containing e.g. camera configuration settings. You can
download configuration settings from AXIS Camera Station to AXIS Camera
Station Client like this:
1. Click File | Get configuration
2. Click OK.
Follow these instructions if you want to upload configuration settings from
AXIS Camera Station Client to AXIS Camera Station. The background service on
AXIS Camera Station will be automatically restarted after the upload
configuration step is done.
1. Click File | Upload configuration
2. Click OK.
Select the cameras that you want a window, showing the camera image, to
open when an alarm is triggered or motion is detected. This functionality is only
active when Pop-up on motion/alarm is enabled.
Select the desired view from this menu, or by using the buttons to the right in
the window. Buttons for the camera view are at the top and buttons for
viewing the I/O status and camera sequences are further down.
Selecting a number of cameras from this menu will open a new window
occupying the entire screen, and shows live images from the connected
cameras. Press Alt+F4 to exit the monitor mode.
AXIS Camera Station User's Manual