Axis Camera Station User Manual page 28

AXIS Camera Station Administration
Record to Hard Disk
Save Recordings to...
Save recordings for
(days)
Backup old recordings
to external storage
28
6. Next, set the motion detection sensitivity level in the Motion Detection
window. Under normal viewing conditions, i.e. when there is no motion in the
image, move the sensitivity slider until there are a few blue bars in the Motion
detected bar.
2. Set the sensitivity
level of the motion
detector until a few
blue bars
appear in the Motion
Detected bar.
7. When there is motion in the camera's image, set the Recording at slider to
the level where you want the recording to begin. If the Motion Detected bar
exceeds this setting, there will be an alarm and recording will begin.
When motion is detected with your new settings, the green Motion
Detected icon is shown. The red Recording icon is also displayed, and will
remain for several seconds, depending on the Images to start/stop setting
on the Recordings tab, see Recordings, on page 25.
Specify where to store your images. This field must always begin with a disk
drive letter, hard disk drive letters "C" to "K" can be used.
The same directory can be specified for multiple cameras, in which case sub-
directories are created in the specified directory.
External storage devices can be used if they are shared and available as shared
disks in Windows. The AXIS Camera Station service user must be changed, as
AXIS Camera Station uses a default Local user (who usually does not have
access to external storage devices).
1. Go to AXIS Camera Station's Service Properties dialog in Windows Control
Panel | Administrative tools | Services | AXIS Camera Station | Action |
Properties | Log On (tab).
2. Choose This account and browse to the user that has access rights to this
device.
Specify the number of days to store saved recordings on hard disk. The value
"default" is specified under the General tab, see page 38.
Images will be deleted when more hard disk space is needed, or when the
recording is older than the amount of days specified in Save recordings for. If
1. Choose to
configure the
settings for day
or night.
3. Set threshold
where recordings
should begin,
according
to the sensitivity
slider position.
AXIS Camera Station User's Manual