Axis Camera Station User Manual page 29

Save backup for (days)
Recording Buffers and
Duration
Pre-event recording
buffer (seconds)
Post-event recording
buffer (seconds)
Maximum event time
(minutes)
AXIS Camera Station User's Manual
this is enabled, recordings will be backed up to the specified external storage
folder, Example: \\192.168.0.110\backup\
Click the browse button to browse to an external backup folder:
The user account properties should be set in the same way as when saving
recordings, see above.
Specify the number of days to store the backup on external storage.
Specify how many seconds of images you want to record before motion is
detected or the alarm is triggered. Up to 50 images can be saved in this buffer.
Specify how many seconds of images to record after motion detection or the
alarm has ended.
The maximum recording period (in minutes).
The Maximum event time is used to divide the Continuous recording into
events of X minutes.
The input/output definitions specified under the External I/Os tab are affected
by this parameter. See Input/Output, on page 42 for information on configuring
inputs and outputs.
• If the maximum is reached but motion is still detected at an input, a new
event is created and recording continues. See Example 1: Maximum alarm
event time - Input, on page 30.
If the maximum is reached but motion is still detected at an output,
•
recording will only continue the time specified here. See Example 2:
Maximum alarm event time - Output, on page 30.
AXIS Camera Station Administration
29