Axis Camera Station User Manual page 10

AXIS Camera Station Installation
10
From the Cameras tab:
2. Select camera
to configure
3. Camera enabled
checkbox must
be checked!
4. Name the camera
or video server
5.
Enter camera's
Local IP address
(LAN) and Internet
address (WAN)
(or host names).
9. Check connection to camera by clicking Link to camera.
Next, under Views, define the camera views as seen from AXIS Camera Station:
10. Select view according
to the number of
cameras you want to
configure.
Example:
To configure 4
cameras, select
To configure 8
cameras, select
13. Select frame rate
for viewing feed
14. Select quality
for viewing
15. Repeat steps 2 and 3 for all cameras.
16. Click OK to save and exit.
Next, go to General tab and make sure that the IP address of the local
dedicated computer is entered in the Server IP address field.
You have now performed the minimum required setup. See AXIS Camera Station User Interface,
on page 11 and AXIS Camera Station Administration, on page 18 for configuration instructions.
6.
the correct camera
or video server
type.
7. For video servers,
specify video port
number in Camera port
number field.
8. Enter a user name
and password
default user = root
default password = pass
11. Select camera position
for camera 5
AXIS Camera Station User's Manual
Click "?" to obtain
12. Select camera 5