Axis Camera Station User Manual page 33

Continuous recording
Alarm/Motion
recording
Alarm Notification
AXIS Camera Station User's Manual
Follow these instructions to configure a camera to record continuously. This
recording mode uses more disk space than recording only on alarms or motion.
By default, all schedules are enabled at all times.
In order to define a recording schedule, you must first register the camera
under the Cameras tab and enable Continuous recording under Recordings:
1. From Recordings, select a camera from the Select Camera drop-down list.
For a camera to appear in the drop-down list, it must be registered under
the Cameras tab, see Cameras, on page 19 for instructions.
2. Check the Continuous recording checkbox and click Apply.
3. Under Schedules, the Continuous recording indicator bar will be completely
filled in with red. Right-click and drag on the indicator bar if you wish to
modify the interval.
4. Click Apply to save the new settings.
Schedule the intervals during which recordings can be triggered by alarms or
motion detection.
In order to define a recording schedule, you must first register the camera
under the Cameras tab and enable Record on I/O alarms and motion detection
or enable Record on I/O alarms under Recordings.
Schedule the intervals when to notify users on alarms, i.e. send email. This
period will usually be the same as the period set for Alarm/Motion recording.
In order to define a recording schedule, you must first register the camera
under the Cameras tab, see Cameras, on page 19 for instructions.
AXIS Camera Station Administration
33