Axis Camera Station User Manual page 20

AXIS Camera Station Administration
Select Camera
Camera Explorer
button
Enable camera
Camera Name
20
Click the "..." button to open the Camera Selection view; a non-editable table
containing summarized information on all configured Axis cameras and
network video servers.
Switch between available cameras. You will only be able to set up the number
of cameras defined by your license.
AXIS Camera Station can automatically detect cameras and video servers in
your network.
To detect and add/remove new cameras, click this button to open the Camera
Explorer, a tool that scans a user-defined range of IP addresses and displays
any Axis camera or video server found on the network.
1. Enter IP range you wish to scan, e.g.
171.15.115.2 - 171.15.115.254
Detect, add or remove cameras in the Camera Explorer
Check to enable image capture from the camera. If this checkbox is not
checked when registering a camera, recordings and live-view will not be
possible!
The camera's name as it will appear in the Main window, alarm log and web
page.
2. Click
Scan
AXIS Camera Station User's Manual