Axis Camera Station User Manual page 22

AXIS Camera Station Administration
Enable Audio
Enable Image
Enhancer
Enhancement Level
FTP
22
Check this if you want sound when the camera has a microphone built-in or
attached. This enables full duplex live audio between camera/microphone and
user. Note that the recordings do not contain any audio.
Check this if you have purchased a license for the AXIS Image Enhancer
component and wish to use it for an Axis camera or video server. When enabled
during recording or playback, AXIS Image Enhancer can improve the image
quality in poor visibility conditions, such as fog, smoke, rain and snow.
Enter the level of enhancement to be used for this camera. To determine what
the best value for the Default Factor should be, check Enable Image Enhancer
and click Test Image to see the changes and try out various different settings
using the slider.
AXIS Camera Station usually gets images from the camera via HTTP, but it is
also possible to record images via FTP, whereby the camera first pushes the
images to an FTP server and ACS retrieves the images from the FTP server. This
may be done to save on network bandwidth.
Note:
Live view is not possible from AXIS Camera Station over ftp, only recorded
images can be sent to an FTP server.
The camera contains the settings that specify when to send images over ftp,
see your Axis camera documentation for details. The FTP server can be installed
on the same server as AXIS Camera Station or on another server within the
same Windows network. The camera must be set up to send a file via FTP on I/O
activity or motion.
Note:
IIS has an integrated FTP server that needs to be enabled manually. See your
Windows documentation for instructions.
AXIS Camera Station User's Manual