Using Logical Printers To Customize Your Printing - Axis 5600+ User Manual

AXIS 5600+ User's Manual

Using Logical Printers to Customize your Printing

The AXIS 5600+ has a powerful facility for altering the print data.
This means that your desired print format can be realized on any type
of printer. The following actions can be invoked from the AXIS
5600+:
• The character set can be changed to suit the printer
• Strings can be added before and after the print data
• Strings within the print data can be substituted
• ASCII to PostScript conversion
• Redirection of print data to another printer if the printer is busy
• Hex Dump mode to assist with printing problems
If any of these actions are required, a Logical Printer is used to
change the print data before being sent to the printer port. There are
eight logical printers (PR1-PR8) that can be set up to filter the print
data.
The default logical printers settings are such that PR1-PR4 cause no
change to the flow of print data, while PR5-PR8 add CR to LF control
characters:
Logical Printer
PR1
PR2
PR3
PR4
PR5
PR6
PR7
PR8
Each logical printer can be set via the print servers' internal web
pages: Open a Web browser, enter the IP address of the print server in
the "URL/Adress"-field and choose Admin | Logical Printer Settings.
The logical printers can also be set up by editing the config file.
Changes to data
no change
no change
no change
no change
add CR to LF
add CR to LF
add CR to LF
add CR to LF
159