Setting Up - Os/2 - Axis 5600+ User Manual

AXIS 5600+ User's Manual

Setting Up - OS/2

Having connected the AXIS 5600+ to your network, as described in
Connecting the Hardware, on page 20, this section now describes
how to set up your AXIS 5600+ for printing in the OS/2 environment.
Continue with the instructions presented in the table below:
Printing
protocol
TCP/IP
NetBIOS/NetBEUI
If you intend to operate your AXIS 5600+ in a multiprotocol
environment, you should also proceed to the other relevant sections
in this manual:
Section Setting Up - NetWare, on page 53
Section Setting Up - Windows, on page 37
Section Setting Up - Macintosh, on page 99
Section Setting Up - UNIX, on page 106
See ...
TCP/IP Printing, on page 94
NetBIOS/NetBEUI Printing, on page 95
93