Installing The Optiview Wireless Network Analyzer Application - Fluke OptiView Getting Started Manual

Installing the OptiView Wireless Network Analyzer
Application
There are three steps involved in the installation of the application:
1. Move the installation file from the Wireless Network Analyzer Option CD
to your Integrated Network Analyzer.
2. Install the software on the analyzer.
3. Install the wireless PC card.
You can use a USB CD drive or a USB flash drive to install the software.
Any previous version of the Wireless Network Analyzer must be uninstalled first.
You can use the Windows Control Panel to remove the program, or you will be
prompted to remove any previous version when you run the Install program. After
removing a previous version using the Install program, you must run the Install
program a second time to install the new software.
The update software can be installed on OptiView Integrated Network Analyzers
that are running Windows XP or Vista.
Remove the wireless PC card from the analyzer before installing the software
update.
If you are using a USB flash drive:
1. Insert the OptiView Wireless Network Analyzer Option CD into your PC.
Autostart should launch the user interface. If not, use Windows Explorer
and double-click on launch.exe.
2. Press the Update Software button.
3. Press the Copy Update Software button.
4. From the window, save the WNAInstall.exe file to the flash drive.
5. Install the flash drive in a USB port on your Integrated Network Analyzer.
6. Use Windows Explorer and run the WNAInstall.exe file. The InstallShield
Wizard is executed and the installation begins. Follow the on-screen
instructions to complete the installation.
7. Continue with step 14.

Installing the OptiView Wireless Network Analyzer Application

Notes
Wireless Network Analyzer
5