To Set Up A Conference - AT&T Merlin Legend MLX-20L Operation Manual

To Set Up a Conference

1. Make a call to the first outside number or extension.
2. Press Conf after the person answers.
The green light next to the call button flashes, signaling that a person is
on hold for the conference.
3. Press another call button. Dial the next phone number or
extension, or press DSS button to add the next participant.
4. When the person answers, announce the conference.
5. If the person is available, press Conf.
All participants, including you, are connected on the call button you used
to begin the conference.
If the person is unavailable, hang up (if you are using a handset),
press Speaker (if you are using a speakerphone), or press
Release (if you are using a headset), and press the call button to
return to the conference participants.
6. Press Conf.
7. Repeat steps 3 through 5 to add more participants.
8. To end the conference (everyone, including you, is
disconnected), press Forced Release.
To Temporarily Leave a Conference
1. Press Hold.
Conference participants can still talk.
2. To rejoin the conference, press the call button for the
conference.
To Drop the Last Conference Participant Added
1. Press Drop.
2. Press the call button for the conference.
2-18