Adding A New Contact - Avaya 9620 User Manual

Contacts
3. Press Details to see the information available for that contact.
4. Press the appropriate softkey to call or edit this contact, delete this contact, or return

Adding a new contact

You can add up to three numbers for a contact.
1. Press Contacts.
2. Press New if this is your first contact list entry, or press More then New if you already
3. Enter the name using the dialpad.
4. Select the next field.
5. Enter the telephone number and press Primary if applicable.
™
48 Avaya one-X Deskphone Edition for 9620/9620C/9620L IP Telephone User Guide
Selecting Details is the only way to dial a second or third number for a contact.
to the Contacts screen.
have entries in your contact list.
a. Press the number key that corresponds to the letter or number you want to enter
until the letter or number is displayed.
b. Pause before entering the next character if the characters are on the same key.
c. To enter a space, press 0.
d. Enter remaining letters or numbers.
e. Press Bksp to delete the last character.
Note:
If you want to remove a letter, number, space, or symbol that is in the middle of
the text you entered, use the left and right navigation arrows to place your
cursor after the character you want to remove. Once your cursor is in the
correct position, press Bksp to remove the character to the left of the cursor.
f. Press More > Abc to change between upper and lower case letters or to enter
numbers.
g. Press ABC again to cycle through the options (Abc/123/abc/ABC) until the type
you want to use is displayed.
h. Press More > Symbols to enter characters that are not on your dialpad.
i. Select the symbol you want to use.
j. Press OK to select the symbol.
k. Press Clear to delete all text and start over.
November 2009