3.3 MASCHERA PRINCIPALE
Visualizzazione stato Venti-
latori/Pompe/Compressore
Status view Fans/Pumps/
Compressor
Modalità di funzionamento
Operating mode
Visualizzazione stato
macchina
Macchine display
3.3.1 VISUALIZZAZIONE DATA/ORA E TEMPERATURA
ESTERNA
Nella prima riga viene visualizzata la data e ora corrente impo-
stata sotto il menù Orologio/Fasce ed il giorno della settimana
calcolato in funzione della data impostata.
N.B.: è importante che questi parametri siano impostati corret-
tamente nel caso di utilizzo delle fasce orarie per la gestione
dell'impianto e in caso di controllo con sonda di compensazio-
ne aria esterna.
3.4 ACCESSO AL MENU' PRINCIPALE
Questa è la maschera principale visibile a sul display della vs.
Pompa di calore.
Premendo il tasto Prg si può accedere al menù di impostazio-
ne della pompa di calore tramite l'inserimento della pwd 0000
per l'utente.
3.5 CAMBIO MODALITA' DI FUNZIONAMENTO
Con l'ausilio delle frecce su e giù posizionare la barra nera di
selezione sulla voce di menù : A.F.UNIT (fi g. 3.5)
quindi premere il tasto INVIO
3.3 MASK HOME
3.3.1 DISPLAY DATE / TIME AND EXTERNAL
TEMPERATURE
In the fi rst line it displays the current date and time set in the
menu Clock / bands and the day of the week calculated accor-
ding to the set date.
N.B .: it is important that these parameters are set correctly
when using the switching times for the system management
and in case of outdoor air compensation sensor control.
3.4 ACCESS TO THE MAIN MENU
This is the main form visible on the display vs. Heat pump.
Pressing the Prg button you can access the setup menu of the
heat pump
through the insertion of the pwd 0000 for the user.
3.5 CHANGE RULES OF OPERATION
With the help of the up and down arrows to position the black bar
selection on the menu item: A.F.UNIT (Fig. 3.5)
then press the ENTER key
24
Visualizzazione data/ora
Display date / time
Visualizzazione tempe-
rature acqua (impianto/
sanitario)
Display water temperature
(plant / health )
Menù Info/ON-OFF/Set
Info/ON-OFF/Set Menu