Siemens SIMATIC ET200SP Equipment Manual page 33

Technical specifications
Article number
Clock synchronization
• supported
• to DP, master
• to DP, slave
• in AS, master
• in AS, slave
• on Ethernet via NTP
Interfaces
Number of PROFINET interfaces
Number of PROFIBUS interfaces
Optical interface
1. Interface
Interface types
• RJ 45 (Ethernet)
• Number of ports
• integrated switch
• BusAdapter (PROFINET)
Protocols
• IP protocol
• PROFINET IO Controller
• PROFINET IO Device
• SIMATIC communication
• Open IE communication
• Web server
• Media redundancy
PROFINET IO Controller
Services
PG/OP communication
–
Isochronous mode
–
Direct data exchange
–
IRT
–
PROFIenergy
–
Prioritized startup
–
Number of connectable IO Devices,
–
max.
Of which IO devices with IRT, max.
–
32
6ES7510-1DJ01-0AB0
Yes
Yes; Via CM DP module
Yes; Via CM DP module
Yes
Yes
Yes
1
1; Via CM DP module
No
Yes; X1 P3; opt. X1 P1 and X1 P2 via BusAdapter
BA 2x RJ45
3; 1. integr. + 2. via BusAdapter
Yes
Yes; compatible BusAdapters: BA 2x RJ45, BA 2x
FC, BA 2x M12
Yes; IPv4
Yes
Yes
Yes
Yes; Optionally also encrypted
Yes
Yes; MRP Automanager according to IEC 62439-2
Edition 2.0
Yes
Yes
Yes; Requirement: IRT and isochronous mode
(MRPD optional)
Yes
Yes; per user program
Yes; Max. 32 PROFINET devices
64; In total, up to 256 distributed I/O devices can
be connected via AS-i, PROFIBUS or PROFINET
64
CPU 1510SP-1 PN (6ES7510-1DJ01-0AB0)
Equipment Manual, 05/2021, A5E03506268-AD