Table of Contents
Advertisement
SPECIALSETTINGS
Select the next digit position with » « (you
can switch back with » «).
Repeat the procedure for all characters.
Confirm the number by pressing »OK«.
Note:
The primary and secondary DNS (Domain
7
Name System) are the network address of
the server allocated by the provider.
10 E nter the Primary DNS.
S elect the first number with » « or » « and
press »OK« to confirm.
S elect the next digit position with » « (you
can switch back with » «).
R epeat the procedure for all characters.
Confirm the number by pressing »OK«.
11 E nter the Secondary DNS.
S elect the first number with » « or » « and
press »OK« to confirm.
S elect the next digit position with » « (you
can switch back with » «).
R epeat the procedure for all characters.
Confirm the number by pressing »OK«.
Note:
The SSID (Service Set Identifier) is the
7
WLAN network code, and is used to iden-
tify this wireless network.
12 E nter the SSID:
E nter the first character with » «, » «, » « or
» « and press »OK« to confirm.
Repeat entry for all other characters.
O nce the network key has been entered
completely, press » «, » «, » « or » «
to select the push button »OK« and press
»OK« to confirm.
Notes:
Numbers, capital and lower case letters
7
and special characters are available for
input.
Scroll through the menu pages with » « or
7
» « to select all other characters.
If you make a mistake during entry, press
7
» «, » «, » « or » « to select the push
button »BKSP« and press »OK« to confirm.
The last character is deleted.
46
ENGLISH
-----------------------------------------------------------------------------------------------------
If you wish to exit the menu prematurely,
7
press » «, » «, » « or » « to select the
push button »CANCEL« and press »OK«
to confirm. The device switches back one
menu level.
Note:
The encryption settings of the device must
7
match those of the router.
13 S elect the encryption level with » « or » «
and press »OK« to confirm.
Note:
You can select different encryption levels:
7
»Open« – Choose between »Disabled«
and »WEP«.
»Pre-Shared Key« – Choose between
»Disabled« and »WEP«.
»WPA« – Choose between »TKIP« and
»AES«.
»WPA2«: highest security level – Choose
between »TKIP« and »AES«.
14 E nter encryption level.
E nter the first character with » «, » «, » «
or » « and press »OK« to confirm.
R epeat entry for all other characters.
Once the network key has been entered
completely, press » «, » «, » « or » «
to select the push button »OK« and press
»OK« to confirm.
Notes:
»Please wait, processing« now appears in
7
the display. The connection to the WLAN
router and therefore to the Internet is being
established.
If connection is successful, » Connected«
7
appears on the display.
If connection has failed, »Failed to connect«
7
appears on the display.
Advertisement
Table of Contents
