Switch-On Timer - Grundig Sonoclock 895 WEB DAB+ Manual

TIMER­MODE
Your device has 3 timer modes:
– T he switch-on timer, which switches the
device on at the set time and wakes you
with the input source you selected.
– T he sleep timer, which switches the device
off at a preset time.
– T he reminder timer (NAP), reminding you
by sounding the signal tone at a preset
time.
Switch-on­timer
Setting­the­timer
1 Switch on the device from standby mode by
8
pressing » « on the remote control or
»ON/OFF« on the device.
2 Press »MENU« to open the menu.
3 Select the option »Main menu« with » « or
» « and press »OK« to confirm.
4­Select the option »Alarms« with » « or » «
and press »OK« to confirm.
5 Select the option »Alarm 1« with » « or » «
and press »OK« to confirm.
– »Alarm 1« submenu appears on display.
Alarm 1
Enable: Off
Time: 00:00
Mode: Internet radio
Preset: Last listened
Volume: 12
6 Select the option »Enable« with » « or » «
and press »OK« to confirm.
Select the preferred option (»Daily«, »Once«,
»Weekends« or »Weekdays«,) with » « or
» « and press »OK« to confirm.
7 Select the option »Time« with » « or » «
and press »OK« to confirm.
– Display: The clock digits for the hours flash.
Press » « or » « to set the alarm hour and
press »OK« to confirm.
– D isplay: The clock digits for the minutes
flash.
40­
ENGLISH
­--------------------------------------------------------------------------------------------------------------------------
Press » « or » « to set the alarm minute and
press »OK« to confirm.
– Display: The previous menu reappears
automatically.
8 To set the timer source, select the option
»Mode« with » « or » « and press »OK« to
confirm.
Press » « or » « to select the timer source
from »Buzzer«, »Internet radio«, »DAB« or
»FM« and press »OK« to confirm.
– D isplay: The previous menu reappears
automatically.
Note:
I f you select one of the »Internet radio«,
7
»DAB« or »FM« options, »Alarm preset«
submenu opens. Press » « or » « to
select »Last listened« or one of the presets
and press »OK« to confirm.
9 Select the option »Volume« with » « or » «
and press »OK« to confirm.
Press » « or » « to set the volume level and
press »OK« to confirm.
10 S elect the option »Save« with » « or » «
and press »OK« to confirm.
– »Alarm saved« appears in the display.
Notes:
To set the second alarm time (»Alarm 2«)
7
repeat steps 5 to 10.
The setting for the alarm times 1 and 2 can
7
also be opened directly using the buttons
»AL1« and »AL2« on the remote control.
If no button is pressed for 10 seconds while
7
setting, the system will quit the process
automatically, and you have to start again.
11 S witch the device to standby by pressing
» 8 « on the remote control or »ON/OFF«
on the device.
– D isplay: Date, time and »
alarm time.
– T he alarm sounds at the set time with the
alarm signal selected.
« with the