Table of Contents
Advertisement
SPECIALSETTINGS
EnterthePINcodeforthe
"remotecontrol"
If you want to play media stored on a PC and
want to use your mobile/smartphone as a "re-
mote control", you can secure this with a PIN
code. This depends on the application in use.
1 Press »MENU« to open the menu.
2 Select the option »System settings« with » «
or » « and press »OK« to confirm.
3 Select the option »Network« with » « or
» «and press »OK« to confirm.
4 Select the option »NetRemote PIN Setup«
with » « or » « and press »OK« to confirm.
5 Enter the NetRemote PIN code four-digit.
Select the first number with » « or » « and
press »OK« to confirm.
Repeat the procedure for all characters.
If the PIN code is complete, press » «, » «,
» « or » « to select the push button »OK«
and press »OK« to confirm.
Notes:
If you make a mistake during entry, press
7
» «, » «, » « or » « to select the push
button »BKSP« and press »OK« to confirm.
The last character is deleted.
If you wish to exit the menu prematurely,
7
press » «, » «, » « or » « to select the
push button »CANCEL« and press »OK«
to confirm. The device switches back one
menu level.
48
ENGLISH
-----------------------------------------------------------------------------------------------------
"Keeping"theconnectiontothe
router
If you want to switch on your device remotely,
the connection to the router must be "kept". If the
device has been switched off, this is not the case.
You can activate this in the "Keep network con-
nected" menu.
1 Press »MENU« to open the menu.
2 Select the option »System settings« with » «
or » « and press »OK« to confirm.
3 Select the option »Network« with » « or
» « and press »OK« to confirm.
4 Select the option »Keep network connected«
with » « or » « and press »OK« to confirm.
5 Select the push button »YES« with » « or » «
and press »OK« to confirm.
Note:
If the push button »NO« is selected and
7
confirmed, then the deletion process will be
cancelled.
6 Press »MENU« to end the setting.
Advertisement
Table of Contents
