Displaying Software And Id Information; Displaying Information And Network Status - Grundig Sonoclock 895 WEB DAB+ Manual

SPECIAL­SETTINGS
Displaying­Software­and­ID­in-
formation
1 Press »MENU« to open the menu.
2 Select the option »System settings« with » «
or » « and press »OK« to confirm.
3 Select the option »Info« with » « or » « and
press »OK« to confirm.
Info
SW version
XXXXXXXXXXX
XXXXXXXXXXX
XXXXXXXXXXX
Spotify version
– The name of the device, the software ver-
sion and the Radio ID (MAC address) are
displayed.
4 Press »MENU« to end the display.
­-----------------------------------------------------------------------------------------------------
Displaying­information­and­net-
work­status
You can display information about your device
and the network used. Settings cannot be made
in this menu.
1 Press »MENU« to open the menu.
2 Select the option »System settings« with » «
or » « and press »OK« to confirm.
3 Select the option »Network« with » « or
» « and press »OK« to confirm.
4 Select the option »View settings« with » « or
» « and press »OK« to confirm.
5 Select the required information with » « or
» «.
– Display: »Active connection« e.g. WLAN
is active;
»WLAN region:« e.g. Most of Europe;
»DHCP:« e.g. DHCP enabled;
»SSID:« network name, e.g. »Netgear«;
»IP address:« (e.g. 192.168.99.131);
»Subnet mask:« (e.g. 255.255.255.0);
»Gateway address:« (e.g. 192.168.2.1);
»Primary DNS:« (e.g. 192.168.2.1)
»Secondary DNS:« (e.g. 0.0.0.0).
6 Press »MENU« to end the display.
43­
ENGLISH