Special­settings; Displaying Software And Id Information; Displaying Information And Network Status; Installing An Additional Network - Grundig Cosmopolit 7 A WEB User Manual

SPECIAL­SETTINGS
Displaying­Software­and­ID­
information
1 Press »MENU« to open the menu.
2 Select the option »System settings« with »
or » « and press »OK« to confirm.
Λ
3 Select the option »Info« with »
press »OK« to confirm.
– The name of the device, the software ver-
sion and the Radio ID (MAC address) are
displayed.
4 Press »MENU« to end the display.
Displaying­information­and­net-
work­status
You can display information about your device
and the network used. Settings cannot be made
in this menu.
1 Press »MENU« to open the menu.
2 Select the option »System settings« with »
or » « and press »OK« to confirm.
Λ
3 Select the option »Network« with »
and press »OK« to confirm.
4 Select the option »View settings« with »
» « and press »OK« to confirm.
Λ
5 Select the required information with »
» «.
Λ
– Display: »Active connection« e.g. WLAN is
active;
»WLAN region:« e.g. Most of Europe;
»DHCP:« e.g. DHCP enabled;
»SSID:« network name, e.g. »Netgear«;
»IP address:« (e.g. 192.168.99.131);
»Subnet mask:« (e.g. 255.255.255.0);
»Gateway address:« (e.g. 192.168.2.1);
»Primary DNS:« (e.g. 192.168.2.1)
»Secondary DNS:« (e.g. 0.0.0.0).
6 Press »MENU« to end the display.
38­
ENGLISH
­-----------------------------------------------------------------------------------------------------
Installing­an­additional­network­
Use this function when you wish to operate your
device at a different location using a different
network.
«
V
The first network (home network) is retained.
1 Press »MENU« to open the menu.
« or » « and
V Λ
2 Select the option »System settings« with »
3 Select the option »Network« with »
4 Select the option »Internet Wizard« (if a stand-
«
V
« or » «
V Λ
5 Select the network with »
« or
V
« or
V
6 Enter network key:
Enter the first character with »
Repeat entry for the remaining characters.
When the network key has been entered
or » « and press »OK« to confirm.
Λ
and press »OK« to confirm.
ard router is used) or the option »PBC Wlan
setup« (if a router with WPS-PBC/Push-Button-
Configuration is used) with »
press »OK« to confirm.
Notes:
If the option »PBC Wlan setup« has been
7
selected, press the WPS button on the router
and then continue the registration using
»OK«.
Your device is registered on the router auto-
7
matically. No further settings are required.
»OK« to confirm.
– The »Key« menu appears (if the network is
encrypted), and the cursor is positioned at
the first input field.
Note:
If the network is encrypted, the network
7
key (security code WEP or WPA) must be
entered.
« and press »OK« to confirm.
completely, select the push button »
» «, » «, » « or » « and press »OK« to
V Λ
confirm.
– The »Internet Setup« menu appears, the reg-
istration on the network is processed.
«
V
« or » «
V Λ
« or » « and
V Λ
« or » « and press
V Λ
«, » «, » « or »
V Λ
8
« with