How To Remove And Install: Door - John Lewis JLBIOS641 User Manual

How to remove and install:
Door
You can remove the door and the internal glass
panels to clean it. The number of glass panels is
different for different models.
Warning! The door is heavy.
Step 1 Fully open the door.
Step 2 Fully press the clamping levers (A)
on the two door hinges.
Step 3 Close the oven door to the first opening position (approximately 70° angle). Hold the door at
both sides and pull it away from the oven at an upwards angle. Put the door with the outer side
down on a soft cloth on a stable surface.
Step 4 Hold the door trim (B) on the top
edge of the door at the two sides
and push inwards to release the clip
seal.
Step 5 Pull the door trim to the front to
remove it.
Step 6 Hold the door glass panels on their
top edge one by one and pull them
up out of the guide.
Step 7 Clean the glass panel with water
and soap. Dry the glass panel care-
fully. Do not clean the glass panels
in the dishwasher.
After cleaning, do the above steps
Step 8
in the opposite sequence.
Oven User Manual
Caution! Carefully handle the
glass, especially around the
edges of the front panel. The
glass can break.
A
2
B
A
1
35