Configure The Tcp/Ip Settings; Configure The Tcp/Ip Settings Of The Print System Controller - Canon Oce TDS Series Administration Manual

Configure the TCP/IP settings

Configure the TCP/IP settings

Configure the TCP/IP settings of the print system controller

Introduction
The procedures described in this section explain how to edit the TCP/IP settings of the Océ Wide
Format printing systems:
• at network integration after the first installation (only for Océ TCS300).
• when already installed and integrated in the network.
Configure the TCP/IP settings
The configuration of the TCP/IP settings changes according to your printer model.
Use the next table to navigate to the procedure you need.
Procedure
If your printer is an
Océ TDS/TCS - except Océ TCS300
Océ TCS300
NOTE
To know the type of your network configuration, see:
page 23.
20 Chapter 2 - Configure the print system controller
Then refer to this procedure
Configure the TCP/IP settings in a network configura-
•
tion by DHCP on page 26
or
Configure the TCP/IP settings in a network configura-
•
tion with a fixed IP-address on page 30
Configure the TCP/IP settings: prepare the configuration
for a first installation on page 21
Get to know the type of TCP/IP network on
Océ TDS/TCS/TC Connectivity information for Windows environments