Canon Oce TDS Series Administration Manual page 29

Configure the TCP/IP settings (Océ TCS300 systems): manual network configuration with a fixed IP-address
Finalise the configuration of the TCP/IP settings with the help of Océ Express WebTools
Procedure
Step Action
1 Type the IP address of the Océ printer in an internet browser.
Océ Express Web Tools page appears.
2 Select the 'Configuration' menu.
Open the 'Network' or 'Connectivity' tab.
3 Go to the '(System) Identification' section.
Click 'Edit' and log in as a System Administrator
4 Define the hostname.
5 Click 'OK' to save the settings.
You are proposed to restart the system. Do NOT restart the system now.
6 Go to the 'TCP/IP (IPv4)' or 'Adapter 1' or 'Network adapter' section.
Click 'Edit' and log in as a System Administrator in order to configure the TCP/IP set-
tings.
7 Configure the TCP/IP (IPv4) settings as follows:
• make sure that 'IP type', when this setting is available, is set to 'IPv4'
• enable 'NetBIOS over TCP/IP', when this setting is available
• define the 'Primary DNS suffix' (if DNS is used in the network).
• define the 'Primary WINS server' IP address, if needed, when this setting is availa-
• make sure the 'Link speed / Duplex mode' is set to the automatic value ('Auto Ne-
8 Click 'OK' to save the settings.
9 You are proposed to restart the system.
Select 'Restart now'. Then click 'OK'
Océ TDS/TCS/TC Connectivity information for Windows environments
NOTE
Make sure the hostname is unique within the network.
It is compulsory if you need to configure a Scan-to-File environment.
Example: <company.department.com>
ble
gotiation'), or to the 'Full duplex' value
Chapter 2 - Configure the print system controller 29