Specifications; Optional System Accessories - Audio Technica ATW-251 Installation And Operation Manual

OVERALL SYSTEM
Operating Frequency
Frequency Stability
Modulation Mode
Maximum Deviation
Operating Range
Operating Temperature Range
Frequency Response
RECEIVER
Receiving System
Image Rejection
Signal-to-noise Ratio
Total Harmonic Distortion
Sensitivity
Audio Output
Output Connector
Power Supply
Dimensions
Net Weight
Accessories Included
WIRELESS ESSENTIALS ® MICROPHONES AND CABLES
All Wireless Essentials accessories are terminated for use with ATW-T201
and other UniPak ™ transmitters.
AT829cW Miniature cardioid condenser lavalier microphone.
Includes clothing clip and windscreen.
MT830cW Miniature omnidirectional condenser lavalier
microphone. Includes clothing clip and windscreen.
MT830cW-TH "Theater" model, same as MT830cW except beige color
mic and cable.
AT831cW Miniature cardioid condenser lavalier microphone.
Includes clothing clip and windscreen.
AT889cW Headworn noise-canceling condenser microphone.
Includes windscreen and cable clip.
AT892cW MicroSet ® headworn omnidirectional condenser microphone.
Includes element covers, windscreens, moisture guard and
clothing clip.
AT892cW-CO Same as AT892cW except cocoa-color mic, earset and
cable.
AT892cW-TH "Theater" model, same as AT892cW except beige color
mic, earset and cable.
AT898cW Subminiature cardioid condenser lavalier microphone.
Includes clothing clip base, viper clip base, magnet clip base,
three single mic holders, two double mic holders and
two windscreens.
AT899cW Subminiature omnidirectional condenser lavalier microphone.
Includes AT899AK accessory kit.
AT899cW-TH "Theater" model, same as AT899cW except beige color mic
and cable. Includes AT899AK-TH accessory kit.
ATM35cW Cardioid condenser instrument microphone.
Includes AT8418 clip-on instrument mount.
ATM73cW Headworn cardioid condenser microphone.
Includes windscreen.
ATM75cW Headworn cardioid condenser microphone.
Includes windscreen.
PRO 8HEcW Headworn hypercardioid dynamic microphone.
Includes windscreen and cable clip.
VHF high band, 169 MHz to 172 MHz
±0.005%
FM
±15 kHz
200' typical
40° F (4° C) to 110° F (43° C)
80 Hz to 13 kHz
Non-diversity, single-channel,
dual antenna system
50 dB minimum
80 dB at 10 kHz deviation (IEC-weighted),
maximum modulation 15 kHz
≤1% (10 kHz deviation at 1 kHz)
20 dBµV for 60 dB S/N (IEC-weighted)
350 mV (1 kHz modulation, 10 kHz
deviation, 100k ohm load)
1 / " TS ("mono") phone jack
4
100-240V AC (50/60 Hz) to 12V DC 1A
(center positive) switched mode external
power supply
7.48" (190.0 mm) W x 1.65" (42.0 mm) H x
5.12" (130.0 mm) D
11.0 oz (311 grams)
Power supply

Optional System Accessories

Specifications

†
UNIPAK ™ TRANSMITTER
RF Power Output
Spurious Emissions
Dynamic Range
Input Connections
Battery (not included)
Current Consumption
Battery Life
Dimensions
Net Weight (without battery)
HANDHELD TRANSMITTER
RF Power Output
Spurious Emissions
Dynamic Range
Microphone Element
Battery (not included)
Current Consumption
Battery Life
Dimensions
Net Weight (without battery)
Accessory Included
† In the interest of standards development, A.T.U.S. offers full details on its test methods to
other industry professionals on request.
PRO 35xcW Cardioid condenser instrument microphone.
Includes AT8418 clip-on instrument mount.
U851cW Surface-mount wide-range hemi-cardioid condenser
microphone.
U857ALcW Gooseneck cardioid microphone. Mounts to
Includes AT8663 A-mount flange, AT8664 A-mount cable
pass-through adapter, AT8153 two-stage windscreen
AT-GCW Hi-Z instrument/guitar cable with
XLRW Connecting cable for UniPak transmitter with an XLRF-type
input connector, for Lo-Z microphones with XLRM-type
output terminations.
OTHER ACCESSORIES
AT8114 Foam windscreen for handheld transmitter.
AT8390 Premium instrument cable with
Available in a variety of lengths.
AT8456a Quiet-Flex
transmitter,
AT8634 Rack-mount adapter kit mounts one ATW-R250 in a single
19" rack space.
ATW-RMS1 Remote mute switch designed to be installed between a
wireless microphone using an HRS-type connector and its
associated body-pack wireless transmitter. Includes
permanently attached 22" cable and belt clip.
ATW-RCS1 Remote momentary-mute/cough switch designed to be
installed between a wireless microphone using an HRS-type
connector and its associated body-pack wireless transmitter.
Includes permanently attached 22" cable and belt clip.
ATW-VP10 Vinyl UniPak
High: 10 mW; Low: 2 mW, typical
Under Federal Regulations
≥90 dB, A-weighted
High impedance, low impedance, bias
9V (NEDA type 1604) alkaline
30 mA typical
Approximately 15 hours (High);
20 hours (Low), depending on battery type
and use pattern
2.56" (65.0 mm) W x 4.33" (110.0 mm) H
x 1.00" (25.4 mm) D
2.8 oz (78 grams)
High: 10 mW; Low: 2 mW, typical
Under Federal Regulations
≥90 dB, A-weighted
Dynamic unidirectional
9V (NEDA type 1604) alkaline
30 mA typical
Approximately 15 hours (High);
20 hours (Low), depending on battery type
and use pattern
9.50" (241.3 mm) long, 2.10" (53.3 mm)
maximum diameter
12.7 oz (360 grams)
AT8456a Quiet-Flex ™ stand clamp
1 / " phone plug.
4
1 / " to 1 / " phone plugs.
4 4
™ microphone stand clamp for handheld
5 / "-27 threads.
8
™ pouch with belt clip to hold UniPak transmitter.
5 / "-27 thread.
8
7