Cooler Connection - Siemens Simotics T-1FW6 Configuration Manual

Configuring
5.3 Mounting
5.3.5

Cooler connection

The connectors can generally be installed using standard tools.
First determine the sum of the pressure losses of the individual cooling components and the
associated piping. Compare the result with the cooling capacity of the cooling unit.
You can connect the cooling system either by means of a connection integrated in the
machine construction or via 1/4" screw-in fittings.
Figure 5-11 Cooler connection
① Inlet
② Return
106
1FW6 external rotor built-in torque motors
Configuration Manual, 12/2020, A5E50516483B AA