Configuring - Siemens Simotics T-1FW6 Configuration Manual

Configuring

Note
Siemens provides the Application & Mechatronic Support Direct Motors service
Contact your local Siemens office if you require mechatronic support with the following:
• Mechanical design of the machine
• Closed-loop control technology to be used
• Resolution and measuring accuracy of the encoder
• Optimum integration of the encoder into the mechanical structure.
Siemens will support you with dimensioning, designing and optimizing your machine by
means of measurement-based and computer-based analyses.
You can obtain additional information from your Siemens contacts. You will find the Internet
link on "Technical Support" in the "Introduction".
1FW6 external rotor built-in torque motors
Configuration Manual, 12/2020, A5E50516483B AA
5
79