Omega i Series User Manual page 22

ALARM 1 ENABLE/DISABLE SUBMENU:
Press b
Press d
ALARM 1 ABSOLUTE/DEVIATION SUBMENU:
Press d
Press d
Absolute Mode allows Alarm 1 to function independently from Setpoint 1. If the
process being monitored does not change often, then "Absolute" Mode is
recommended. The absolute Setpoint values are placed in the Alarm 1 Low and
Hi values.
Deviation Mode allows Alarm 1 trigger at the Setpoint 1 value, as long as the
Alarm 1 Low and Hi values equal 0. Deviation mode is typically the ideal mode if
the process temperature changes often.
ALARM 1 LATCH/UNLATCH SUBMENU:
Press d
Press d
Latched Mode: Relay remains "latched" until reset. To reset already latched
alarm, select Alarm Latch and press Max twice (i.e. Unlatch and then back to
Latch) or from a Run Mode, push d twice to put the unit in Standby Mode and
then push d one more time to return to the Run Mode.
Unlatched Mode: Relay remains latched only as long as the alarm condition is
true.
5) Scroll though the available selection until ENBL displays to
use Alarm 1.
6) Display shows STRD stored message momentarily and then
advances to ABSo only if it was changed, otherwise press a to
advance to ABSo Alarm 1 Absolute/Deviation Submenu.
If DSBL Alarm 1 Disabled was selected, all submenus of Alarm 1
Menu will be skipped and meter advances to ALR2 Alarm 2
Menu. If ENBL Alarm 1 Enabled was selected, Output 1 would
be automatically Disabled.
7) Display flashes previous selection. Press b to ABSo
Absolute or _DEV Deviation.
8) Display shows STRD stored message momentarily (only if it
was changed) and then advances to LTçH .
9) Display flashes previous selection. Press b to LTçH
Latched or UNLT Unlatched.
10) Display shows STRD stored message momentarily (only if it
was changed) and then advances to AçTV .
18