Omega i Series User Manual page 33

DATA FORMAT SUBMENU:
Preformatted data can be sent automatically or upon request from the unit. Use
the Data Format Submenus to determine what data will be sent in this
preformatted data string. Refer to the iSeries Communications Manual for more
information about the data format. At least one of the following suboptions must
be enabled and hence output data to the Serial Bus.
This menu is applicable for Continuous Mode of RS-232 communication.
Press d
ALARM STATUS SUBMENU:
Includes Alarm Status bytes in the data string.
Press d
Press b
Press d
HUMIDITY READING SUBMENU:
Includes Humidity Reading in the data string.
Press d
Press b
Press d
TEMPERATURE READING SUBMENU:
Includes Temperature Reading in the data string.
Press d
Press b
Press d
DEWPOINT READING SUBMENU:
Includes Dewpoint Reading in the data string.
Press d
Press b
Press d
37) Display advances to STAT Alarm Status Submenu.
38) Display flashes previous selection for "Status" (alarm status).
39) Scroll through the available selections: NO, YES.
40) Display shows STRD stored message momentarily and then
advances to HUMD only, if it was changed, otherwise press a to
advance to HUMD Humidity Submenu.
41) Display flashes HUMD .
42) Scroll through the available selections: NO, YES.
43) Display shows STRD stored message momentarily and then
advances to TEMP only, if it was changed, otherwise press a to
advance to TEMP Temperature Submenu.
44) Display flashes TEMP .
45) Scroll through the available selections: NO, YES.
46) Display shows STRD stored message momentarily and then
advances to DEU only, it was changed, otherwise press a to
advance to DEU Dewpoint Submenu.
47) Display flashes DEU .
48) Scroll through the available selections: NO, YES.
49) Display shows STRD stored message momentarily and then
advances to UNIT only, if it was changed, otherwise press a to
advance to UNIT Temperature Unit Submenu.
29