NSW-5
Tuning and Flashing Instructions
7. Use the [OK] softkey to store the new information that has been en-
tered.
8. Repeat steps 6 and 7 for the remaining NAM parameter options to be
viewed and/or changed.
Programming the Security Code:
9. From the Main Menu, use the scroll keys to select the "Security" Sub–
Menu, press [Select] and the current 5–digit security code will appear in
the display. Default is 12345
10. If you wish to change the Security Code at this time, use the numeric
keys to enter the new value.
11. Press the softkey [OK] to store changes.
Programming Emergency numbers:
12. From the Main Menu use the scroll key to select the "Emergency"
Sub–Menu, press the [Select] softkey to access the emergency numbers.
13. If you wish to change the displayed value, use the scroll key to select
the emergency number you wish to change and press [Select]. Then use
the numeric keys to enter the new values
14. To save the value, press the softkey [OK].
15. Press [Back] to exit the menu.
Serial Number (ESN):
17. From the Main Menu, use the scroll key to display the "Serial No." or
ESN of the phone.
18. Press [Back] to exit the menu.
Programmed: (Date the phone is first programmed)
19. From the Main Menu, use the key to display the "Programmed"
menu.
20. Press [Select] and enter a four digit number that corresponds to the
month and year the phone is sold. Example (mmyy)
NOTE:
the date has been entered it can not be changed. Any attempt to enter
the menu once it has been programmed will receive a short beep and the
message "Date already saved".
Exiting NAM Programming:
21. To exit the NAM programming mode, turn the phone off and leave it
off for five seconds.
Page 18
Emergency number 1 (911)
Emergency number 2 (*911)
Emergency number 3 (None)
0199 = January 1999, 0401 = April 2001.
This menu location can be programmed only one time. Once
E 2000 Nokia Mobile Phones Ltd.
PAMS Technical Documentation
Issue 1 10/00