Vctcxo - Nokia NSW-5 Series Service Manual

PAMS Technical Documentation
VCTCXO... command
Starts Voltage Controlled Temperature compensated oscillator tuning
Activation
Alt, T, V
The next automatic selections are made when this tuning function is acti-
vated:
EEPROM DAC value is shown.
The measurement is started when "meas" button is pressed and it is
executed in two steps:
1. User is requested to put signal generator input level –95 dB and fre-
quency 879.030 Mhz
Issue 1 10/00
Status Bar Text
Open Tuning VCTCXO dialog box
– Active Unit = RX
– Operation Mode = Continuous digital
– low band
– Channel 301
– Power level OFF
E Nokia Mobile Phones Ltd.
Service Software Instructions
Page 27
NSW-5