Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BEMIS bioBidet BB800
Summary of Contents for BEMIS bioBidet BB800
- Page 1 BB800 OWNER’S MANUAL...
-
Page 2: Table Of Contents
TABLE OF CONTENTS PRODUCT INFORMATION Important Safeguards & Cautions......4 Other Safety Information........8 Main Unit & Parts............9 PRODUCT INSTALLATION Installation..............10 How To Detach the Unit.........13 Testing & Seat Bumpers.........14 PRODUCT OPERATION Operation..............16 Maintenance..............24 Troubleshooting Guide...........27 Specifications.............28 WARRANTY Warranty................29... -
Page 3: Important Safeguards & Cautions
IMPORTANT SAFEGUARDS & CAUTIONS READ ALL OPERATING INSTRUCTIONS BEFORE INSTALLATION • This product must be connected to a standard voltage power source. Do not connect power cord if the cord is damaged or broken. • This product should be installed according to this manual. Do not plug the unit into a loose electric outlet. - Page 4 CAUTIONS BEFORE INSTALLATION WIRING REQUIREMENT This product MUST be plugged into a regular voltage Grounded GFCI outlet (North America 120V ac, 60Hz/ Europe 220-240V ~, 50/60Hz). The rated power consumption is 660W/600-700W. In locations where only a standard two-prong outlet is available, it is the responsibility of the user to install a grounded three-prong outlet.
-
Page 5: Other Safety Information
OTHER SAFETY INFORMATION MAIN UNIT & PARTS OPTIONAL GROUNDING INSTRUCTIONS DANGER IMPROPER USE OF GROUNDING CAN RESULT IN A RISK OF ELECTRIC SHOCK. ELECTRIC WIRING HAS TO BE DONE IN ACCORDANCE WITH ALL LOCAL CODES, OR IN THE ABSENCE OF LOCAL CODES, WITH THE NATIONAL ELECTRICAL CODES. -
Page 6: Installation
INSTALLATION CAUTION BEFORE INSTALLATION 3. Connect the T-valve. 4. Connect the water supply hose to the assembled • Do not plug in before installation T-valve. • If you need an electric power system or extension, please consult qualified electrician. • Please contact out service center at 847.458.2334 when you want to reinstall the bidet product (move or replacement). -
Page 7: How To Detach The Unit
INSTALLATION (CONT.) HOW TO DETACH THE UNIT 7. Assembly. 8. Bidet Hose Assembly. DO NOT TURN UNIT UPSIDE DOWN. • Disconnect the power plug. • Close water supply shut-off valve. • Drain water from bidet seat using drainage as illustrated. •... -
Page 8: Testing & Seat Bumpers
TESTING & SEAT BUMPERS • Plug the power cord into the outlet, and then the water tank will be filled with water in 2 minutes. • Check all the functions. Cover the toilet using the sheet of plastic wrap on the unit to prevent the washing water from being sprayed out of the toilet. -
Page 9: Operation
OPERATION PREPARATION • Check for any water leaks • Plug the unit into the proper power source and the LED power light will start flashing, • Wait until the LED power light stops flashing and becomes solid red. • The water tank will be filled after pushing a “Wash” button. Adjust the water pressure and warm air dryer temperature. - Page 10 OPERATION FEMININE WASH TURBO WASH • • Press “Feminine Wash.” Automatically, the nozzle Press “Turbo Wash” continuously for 3 to 5 seconds. Automatically, comes out and sprays warm water to feminine area. the water nozzle comes out and sprays a warm stream of water to the posterior center of the rectum.
- Page 11 OPERATION (CONT.) WATER PRESSURE ADJUSTMENT NOZZLES POSITION ADJUSTMENT • • After sitting down on this product, the LED lamp for water pressure on Nozzle position is adjustable to the desired position by pressing the Power Control will light at third or middle level. “Front”...
- Page 12 OPERATION (CONT.) MASSAGE ECONOMY (Energy Saving Mode) • • When using the Posterior Wash or Feminine Wash Functions, pressing The ENERGY SAVER is not on when the LED light is off. the “MASSAGE” button will provide you with a pulsation spray. •...
-
Page 13: Maintenance
MAINTENANCE CLEANING THE NOZZLE WATER DRAINING • When the “Posterior Wash” button is pressed for 3 seconds without If you do not intend to use this product occupying the seat, the nozzle can be cleaned with a soft toothbrush. for 14 days or longer, drain the water from the product’s warm water tank •... -
Page 14: Troubleshooting Guide
MAINTENANCE (CONT.) TROUBLESHOOTING GUIDE PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION CLEANING THE STRAINER • • The washing The water tank Wait about one minute. THIS PRODUCT WILL NOT OPERATE water does is not filled. Press the desired washing PROPERLY IF THE STRAINER IS not spray button once again. -
Page 15: Specifications
SPECIFICATIONS WARRANTY SPECIFICATION BB-800 THREE YEAR LIMITED WARRANTY Power Rating Australia or Europe: 240-240V~, 50/60Hz, 600-700W • 100% Coverage of all parts and labor for the entire product for the first America or Canada: 120Vac, 60Hz, 660W year from original date of purchase Water Type Direct Inlet flow type... - Page 16 WARRANTY (CONT.) INFORMATION TO THE USER (For America) This warranty gives you specific legal rights. You may have other rights which vary from state to state. This equipment has been tested and found to comply with the limits for a To obtain warranty repair service under this warranty, you must take the Class B digital device, pursuant to part 15 of the FCC Rules.
- Page 17 Thank You Technical Support/Customer Service 7900 S Route 31 Crystal Lake, IL 60014 T: 847.458.2334 U.S. TOLL FREE: 877.339.5214 support@biobidet.com www.biobidet.com...