SAFETY PRECAUTIONS IMPORTANT SAFEGUARDS WARNING - TO REDUCE THE RISK OF BURNS, ELECTROCUTION OR INJURY TO PERSONS: • When using electrical products, especially when children are present, basic safety precautions should always be followed. • Close supervision is necessary when this product is used by, on, or near children.
SEAT INSTALLATION Remove the seat from 2. Install the T-Valve. 3. Fix the catch plate onto 4. Push the main body the existing toilet body. the toilet. toward the catch plate completely. Cone washer • Point the arrow on the catch •...
Page 7
5. Connect bidet hose. 7. Plug in! 6. Turn on the water and Using inline carbon filter check for leaks. Use of external water filter is only recommended in areas with known hard water issues. If a filter is used, it must be replaced every 3 months.
HOW TO USE Sit On The Toilet Seat 7. Stop • Be sure to sit on the seat sensor. If the sensor is not occupied, • Hold for 3 seconds to turn off. All operations wlil stop. all functions will not open 8.
HOW TO USE (CONT.) MAINTENANCE & CLEANING 14. Seat Sensor Bypass Cleaning Instructions • Hold the massage button for 3 seconds to activate or deactivate the seat • Avoid using harsh cleaners to preserve the plastic material of the bidet sensor.
TIPS & SPECIFICATIONS TROUBLESHOOTING & WARRANTY PLEASE CHECK THE FOLLOWING POINTS BEFORE ITEM SLIM 3 Rated voltage AC 120V, 60Hz REQUESTING REPAIR SERVICE. Max. Power consumption 870W PROBLEM CHECK LIST Power cord length 1.2 m Recommended inlet • Check if the power plug is not connected 99~106.6 psi Completely out of order water pressure...
Page 12
Thank You Technical Support/Customer Service 7900 S Route 31 Crystal Lake, IL 60014 T: 847.458.2334 U.S. TOLL FREE: 877.339.5214 support@biobidet.com www.biobidet.com...