LASER CLASS 730i/720i/710 5.GUIDE TO REPLACEMENT
5. GUIDE TO REPLACEMENT
FIGURE 3-a
Be sure to remove the stopper first as shown before open-
ing the upper/middle frame ass'y.
FIGURE 6-a
Be sure to route the cable as shown.
See Page
FIGURE 3-b
2-5/7
While freeing the claw, detach the left cover.
See Page
FIGURE 9-a
2-11/13
SCNT board
Connector J2
When connecting the flat cable to the connector J2 of the
SCNT board, face up the white flat cable surface, and con-
nect the core side of the flat cable to the SCNT board.
5-1
See Page
2-5/7
See Page
2-17
To connector J2
Core
White surface